If you have a part no and it isnt here then please send it to me and I'll add it to the list! Also, some of the part numbers are listed as 030-????-??? - if you have this part no then let me know!
Contributors!
Jörg Gerigk
Dave Williams @ MCE
Olaf Pueschel @ Olmos Workstations, Germany - huge list of IR/Kona
and Onyx parts! Plus Onyx2 parts!
An anonymous donor - another huge list with lots of Onyx/Challenge
parts - haven't had time to sort this one out completely but will soon.
IO4 boards and VCAM/GCAM
030-0240-00x | earliest IO4 I/O controller |
030-0377-00x | early IO4 I/O controller |
030-0646-xxx | common IO4 controller |
030-0646-107 | IO4 controller (supports IP21 R8000 and IP25 R10000) |
030-0815-00x | IO4 controller (supports KONA/InfiniteReality gfx, does NOT work with IP21s!) |
030-0536-00x | GCAM (for Extreme gfx option only - seems to require IO4 with 030-0646 or later) also has a FCI (flat cable interface) - see the 030-0501 below for uses |
030-0243-00x | VCAM |
030-0500-xxx | later VCAM - 030-0500-206 is required for IR gfx on Onyx |
030-0502-00x | Remote VCAM for optional third card cage in rackmount Onyx/Challenge chassis |
IP19 CPU Boards and SC SIMMs
030-0525-00x | IP19 with single R4400/150 1Mb SC CPU (Onyx RealityStation?) |
030-0374-00x | IP19 with dual R4400/150 1Mb SC CPUs (rev 008 and higher have 3.3V R4400/150s) |
030-0375-00x | IP19 with four R4400/150 1Mb SC CPUs |
030-0720-001 | IP19 with single R4400/200 4Mb SC CPU (Onyx RealityStation) |
030-0652-00x | IP19 with dual R4400/200 4Mb SC CPUs |
030-0653-00x | IP19 with four R4400/200 4Mb SC CPUs |
030-0806-00x | IP19 with single R4400/250 1Mb SC CPU (Onyx RealityStation) |
030-0805-xxx | IP19 with dual R4400/250 4Mb SC CPUs |
030-0804-xxx | IP19 with four R4400/250 4Mb SC CPUs |
030-0324-00x | secondary cache SIMM 256kb 10ns - blue stripe (IP19 only) |
030-0660-00x | secondary cache SIMM 1Mb 8ns - yellow stripe (IP19 only) |
IP21 CPU Boards
030-0636-00x | IP21 with single R8000/150? 4MB SC chipset |
030-0625-xxx | IP21 with dual R8000/75 4Mb SC chipsets |
030-0751-00x | IP21 with single R8000/75 4Mb SC chipset |
030-0703-xxx | IP21 with single R8000/90 4Mb SC chipset |
030-0702-00x
030-0858-xxx |
IP21 with dual R8000/90 4Mb SC chipsets |
IP25 CPU Boards
013-1672-00x | IP25 with single R10000/195 1Mb SC CPU (Onyx RealityStation or iStation) |
013-1675-00x | IP25 with single R10000/195 2Mb SC CPU (Onyx RealityStation or iStation) |
030-1107-xxx | IP25 with dual R10000/195 1Mb or 2Mb SC CPUs |
030-1072-xxx | IP25 with four R10000/195 1Mb or 2Mb SC CPUs |
MC3 Memory Boards and SIMMs
030-0245-00x | earliest MC3 memory board (32 SIMM slots - supports 16 & 64MB SIMMs) |
030-0604-xxx | MC3 memory board (32 SIMM slots - supports 16 & 64MB SIMMs) |
030-0613-xxx | MC3 memory board (32 SIMM slots - supports 16 & 64MB SIMMs) |
030-0614-xxx | MC3 memory board (32 SIMM slots - supports 16 & 64 Mb SIMMs) |
030-0614-106 | latest MC3 memory board (32 SIMM slots - supports 16 & 64Mb SIMMs) |
030-0256-00x | SIMM 16Mb 60ns 200pin - each chip has 5 legs a side (pink paint stripe) |
030-0257-001 | SIMM 64Mb 60ns 200pin - each chip has 6 legs a side - two PCB sandwich (purple/green paint stripe) |
030-0257-002 | SIMM 64Mb 60ns 200pin - each chip has 6 legs a side - single PCB (purple/green paint stripe) |
VTX/RealityEngine2 Graphics Subsystem
030-0513-00x | DG2 display generator |
030-0233-001 | DI1 edge connector (connects DG2 and RM4/RM5s) |
030-0325-00x | GE10 geometry engine - 12 x Intel i860XP (RE2) |
030-0363-00x | GE10V geometry engine - 6 x Intel i860XP (VTX) |
030-0359-001 | RM4 raster manager (4 Mb TRAM) |
030-0360-001 | RM4T raster manager with resistors removed (4Mb TRAM) |
030-0347-00x | RM5T raster manager (16Mb TRAM) |
030-0292-xxx | EF7 Video/Monitor filter bulkhead panel |
030-0284-00x | Multiple Channel Option (MCO) VME board - connects to DG2 with PB2 (on DG2 - 030-0328) and PB3 (on MCO VME board - 030-0352) paddle boards + three 9290050 flat AMP cables |
030-0506-00x | PAB1 Sirius Paddleboard Interface (optional) |
030-0342-xxx
030-1141-xxx |
Sirius VO2 Video Board (optional) |
KONA/InfiniteReality Graphics Subsystem
030-0686-004 | DG4-2 Display generator |
030-0687-004 | DG4-8 Display generator (optional) |
030-0711-001 | KONA Frontplane/grip/edge connector |
030-0681-003 | GE12-4 geometry engine - 4 proprietory SGI designed processors |
030-0683-004 | RM6-16 raster manager (16Mb TRAM) |
030-0684-004 | RM6-64 raster manager (64Mb TRAM) |
013-1342-xxx | VIO2 Video/Monitor filter bulkhead panel (2 channels) - uses 68 pin 9290129 cable from DG4-2/DG4-8 |
030-0768-xxx | VIO6 Additional six channels for use with DG4-8 only - uses 80 pin 9290130 cable from DG4-8 (not necessary for DG4-2) |
013-1340-00x | VIO2C Video/Monitor filter panel (2 channels) - fits into cardcage door panels on third card cage (CC3) option for rackmount Onyx InfiniteReality - uses 68 pin 9290129 cable from DG4-2 in CC3 |
030-0766-00x | PAB2 Sirius Paddleboard Interface (optional) |
030-0342-xxx
030-1141-xxx |
Sirius VO2 Video Board (optional) |
Extreme Graphics Subsystem
013-0925-00x | GIO->Ebus slot adaptor for Extreme gfx option on Onyx (pcb is 030-0610-00x) |
013-1248-00x | GIO->VME slot adaptor for Extreme gfx option on Challenge |
030-8105-00x | Extreme VB2 board |
030-8226-00x | Extreme RU1 board |
030-8106-00x | Extreme GU1 board |
Onyx RealityEngine2/Extreme Deskside Backplane,
Power Boards and OLS
030-0310-00x | RealityEngine2/Extreme gfx deskside backplane |
030-0555-00x | KONA Ready gfx deskside backplane (works with IR, RE2 and Extreme gfx) |
030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V ebus power brick |
030-0264-00x | 512 power board (has 12V and 5V power bricks for VME slots) |
030-0263-00x | 505 power board (has 2 x 5V power bricks) - 2 of these for RE2/Extreme graphics |
013-0513-00x | 48V@40A Power Supply OLS |
030-0278-00x | SCSI backplane with space for 7 drives + trays |
Onyx RealityEngine2 Rack Midplane (CC1 & CC2),
Power Boards and OLS
030-0254-00x | RealityEngine2 gfx midplane |
030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V ebus power brick |
030-0318-00x | 505 x 2 power board with 4 x 5V bricks for RE2 gfx only (2 of these for RE2 gfx) |
030-0264-00x | 512 power board (has 12V and 5V power bricks for VME slots) |
013-0513-00x | 48V@40A Power Supply OLS (2 for standard config. 3 + 3-phase power for 3 cardcage config) |
Onyx InfiniteReality Deskside Backplane, Power Boards
and OLS
030-0555-00x | KONA Ready gfx deskside backplane |
030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V@30A ebus power brick |
030-0739-00x | 512T power board (5V @ 50A and 12V @ 17A for VME boards) |
030-0677-00x | 303 power board (3.45V @ 120A for IR gfx boards) |
030-0740-00x | 305 power board (3.45V @ 60A for IR gfx boards, 5V @ 60A for IO4 and ?????) |
013-1592-00x | 48V@50A Power Supply OLS for IR gfx |
030-0278-00x | SCSI backplane with space for 7 drives + trays |
Onyx InfiniteReality Rack Midplane (CC1 & CC2)
Power Boards and OLS
030-0556-00x | KONA Ready gfx upper midplane |
030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V@30A ebus power brick |
030-0742-00x | 512Tx2 power board (5V @ 50A and 12V @ 17A for VME slots) |
030-0741-00x | 303 x 2 power board (3.45V @ 240A for IR gfx boards) |
030-0743-00x | 305 x 2 power board (3.45V @ 120A for IR gfx boards and 5V @ 80A for IO4s and ????) |
013-1592-00x | 48V@50A Power Supply OLS for IR gfx (2 for standard config, 3 + 3 phase power for 3 cardcage config) |
013-0538-00x
013-1650-00x |
Blower unit for top of rackmount chassis - two required - see pictures here and here. 013-1650 is the higher speed (1900rpm) unit used with third card cage (CC3) option. |
Onyx InfiniteReality Optional 3rd card cage (CC3)
backplane and power boards
030-0557-001 | KONA Ready gfx backplane for optional third cardcage |
030-0739-00x | 512T power board for CC3 (5V @ 50A and 12V @ 17A for VME slots in CC3) |
030-0677-00x | 303 power board for extra IR pipes (5 required for two additional IR pipes in CC3 - each 303 suplies 3.45V @ 120A) |
Challenge L/DM Backplane, Power Boards and Power
Supply (OLS)
030-0314-00x | Challenge L backplane |
013-1003-001 | Challenge DM backplane - supports just one IP19/IP21/IP25* |
030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V@30A ebus power brick |
030-0264-00x | 512 power brick (has 12V and 5V power bricks for VME slots) |
030-0263-00x | 505 power brick (has 2 x 5V power bricks) |
013-0513-00x | 48V@40A Power Supply OLS |
030-0278-00x | SCSI backplane with space for 7 drives + trays |
Challenge XL Midplane, Power Bricks and Power Supply
(OLS)
030-0253-00x | Challenge XL midplane |
030-0296-00x | VME backplane for third cardcage (CC3) in Challenge XL (when installed needs 3 phase power?) |
030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V@30A ebus power brick |
030-0318-00x | 505 x 2 power board (4 x 5V power bricks) |
030-0264-00x | 512 power board (has 12V and 5V power bricks for VME slots) |
013-0513-00x | 48V@40A Power Supply OLS Challenge XL (2 for standard config, 3 + 3 phase power for 3 cardcage config) |
013-0538-00x
013-1650-00x |
Blower unit for top of rackmount chassis - two required - see pictures here and here. 013-1650 is the higher speed (1900rpm) unit used with third card cage (CC3) option. |
Onyx rackmount/Challenge XL SCSIBox2 backplane and
power boards
030-0275-00x | SCSI backplane for SCSIBox with 8 drive slots - not compatible with deskside or vault |
030-0271-00x | SCSI 512S power board (has 12V and 5V power bricks - gets 48V from midplane and sits on top of the SCSI backplane) |
Onyx/Challenge Mezzanine Boards for IO4
030-0244-00x | MEZZ SCSI S1 controller board (short) |
030-0527-xxx | MEZZ SCSI SCIP controller board (short) |
013-0963-00x | MEZZ FDDI dual SAS network board (short) |
013-0964-00x | MEZZ FDDI dual DAS network board (short) |
030-0753-00x | MEZZ SAMZ Audio/Serial daughter board for IO4 (short) |
030-0501-00x | MEZZ single FCI (flat cable interface) board (short) - eg. to connect remote VCAMs in optional third card cage to main IO4 in slot 11 of rackmount machines |
Some Interesting Onyx/Challenge VME Boards
030-0522-00x | HiPPI Interface Board (needs to be paired with an 030-0501-00x FCI board) |
030-0284-00x | MCO board for RealityEngine2 gfx |